http://embdev.gotdns.org/bsd/
http://embdev.gotdns.org/bsd/
>> OpenBSD BOOT 2.2
Booting bsd@ 0x4000
3359728 +
(booting message)
(I)nstall or (S)hell? i
(message)
Specify termincal type: [sun]
(message)
Proceed with install? [n]y
(message)
Available disks are: sd0.
Which one is the root disk? (or done) [sd0]
(message)
Initial label editor (enter ‘?’ for help at any prompt)
>p
device: /dev/rsd0c
type: SCSI
disk: SCSI disk
label: SUN0424 cyl 1151
bytes/sector: 512
sectors/track: 80
tracks/cylinder 9
sectors/cylinder: 720
cylinders: 1151
total sectors: 828720
free sectors: 828720
rpm: 4400
16 partitions:
# size offset fstype [fsize bsize cpg]
c: 828720 0 unused 0 0
>a
partition: [a]
offset: [0]
size: [828720] 763200
FS type: [4.2BSD]
mount point: [none] /
> a b
offset: [763200]
size: [65520]
FS type: [swap]
>p
device: /dev/rsd0c
type: SCSI
disk: SCSI disk
label: SUN0424 cyl 1151
bytes/sector: 512
sectors/track: 80
tracks/cylinder 9
sectors/cylinder: 720
cylinders: 1151
total sectors: 828720
free sectors: 828720
rpm: 4400
16 partitions:
# size offset fstype [fsize bsize cpg]
a: 763200 0 4.2BSD 1024 8192 16 # /
b: 65520 763200 swap
c: 828720 0 unused 0 0
>q
Write new label?: [y]
The root filesystem will be mounted on sd0a.
sd0b will be used for swap space.
Done – no available disks found.
You have configured the following partitions and mount points:
sd0a /
The next step creates a filesystem on each partition, ERASING existing data.
Are you really sure that you’re ready to proceed? [n] y
/dev/rsd0a: 763200 sectors in 1060 cylinders of 9 tracks, 80 sectors
372.7MB in 67 cyl groups (16 c/g, 5.62MB/g, 1344 i/g)
/dev/sd0a on /mnt type ffs (rw, asynchronous, local, ctime=Sat Mar 8 22:52:36)
Enter system hostname (short form, e.g. ‘foo): web
Configure the network? [y]
If any interface will be configured by DHCP, you should not enter
information that will be supplied via DHCP, e.g. the DNS domain name.