How To: Bond 2 or more network cards (NIC) together (aka Teaming, Link Aggregagation) Posted by Panagiotis Mantzouranis on 19 November 2012 09:00 PM

The actual speed gain depends and is apparent when copying files to more than 1 client at the same time. In any case, if your network infrastracture supports it, it is always a good practice.

In order to achieve this you will need 2 things:

1. A computer with 2 or more interfaces of the same manufacturer with drivers supporting teaming (most manufacturers do)
2. A switch that supports Link Aggregation (e.g. CISCO SRW series)

First install the latest NIC drivers (also download advanced & utility drivers if availiable)

• Intel – Download Drivers that include Intel® PROSet utility for Teaming & Vlan HERE
• Realtek – Download latest drivers HERE
• Marvell Yukon – Download Drivers & Network Control Utility HERE

Open the switch’s Web interface or Configuration utility and navigate to teaming options. Option may vary depending on the manufacturer, so consult the user manual and search for teaming, bonding and link aggregation

Create a new Team and assign 2 or more switch ports to the Team, depending on your NIC interfaces, also enable LACP.

Image: Linksys SRW2008 Link Aggregation Settings

Next, go to control panel >network connections and right click >properties on one of the network adapters.

Create a new Team and select “IEEE 802.3ad Link Aggregation” as Teaming Protocol. Add the rest of the NIC to the team. A new Network card should appear in network connections. Any IPs should now be assigned to this interface.

Connect the NICs to the appropriate Ethernet ports.

You should now have a working NIC Team!